Primers


Interlux InterProtect 2000E

InterProtect 2000E is a two-part epoxy primer designed to reduce the potential of water absorption by fiberglass hulls. InterProtect is unique among epoxies because it has Micro-Plates, a protective barrier within its film to slow down water permeation. It prevents and repairs gelcoat blistering and is excellent for use on underwater metals, hulls and keels. InterProtect has superior adhesion to all common yacht substrates and can be applied with a brush, roller, or sprayer. Suitable for both above and below the waterline, use Interprotect as part of a no sand system.
You may also need:
Thinner: 2316N

Interlux InterProtect 3000/3001

A unique, high solids, two-part epoxy coating, developed to protect old and new fiberglass hulls from water absorption, which can lead to hull blistering. InterProtect has a low VOC for reduced solvent emissions and contains Micro-Plates for extra protections. It can act as an anticorrosive primer for metals and is typically used as a primer for below the water line. Great for all surfaces. InterProtect can be applied with a brush, roller, or sprayer.
You may also need:
Thinner: 2316N

Interlux Primocon

Primocon is a conventional one-part primer for use below the water line. It is quick drying with anticorrosive properties. It can be used under all major antifoulings or as a conversion coat over incompatible or unknown antifoulings. Works great on all surfaces and can be applied with a brush, roller, or sprayer.
You may also need:
Thinner with brush/roller: 433
Thinner with sprayer: 216

Interlux Outboard and Outdrive Aerosol Primer

Interlux Outboard and Outdrive Aerosol Primer is formulated for use on underwater areas of aluminum outdrives and outboards, prior to application Trilux Prop & Drive or Trilux 33 Aerosol. Outboard and Outdrive Aerosol Primer is a non bleeding, anticorrosive primer that provides an excellent barrier on metal surfaces, reducing galvanic corrosion. Use only on aluminum.

Interlux Fiberglass No-Sand Primer

Do away with the need to sand before applying Interlux antifouling paint by using Interlux Fiberglass No Sand Primer. Fiberglass No Sand Primer is designed to eliminate the need to sand prior to applying antifouling paint to new or unpainted boats. Also use on epoxy primers to improve the adhesion of antifouling paint. It is typically used below the water and under antifouling paints. No need for a thinner – apply with brush or roller to fiberglass surfaces.

Interlux Prekote

Prekote is recommended anywhere above the true waterline where a coating is needed to provide a smooth, fair surface for overcoating with a topside enamel. PreKote is an undercoat for one-part finishes that contains Microspheres for superior build and hide, while improving flow and sandability. Do not use under two-part products. Apply with a brush, roller, or sprayer to fiberglass, wood, aluminum and steel.
You may also need:
Thinner with brush/roller: 333
Thinner with sprayer: 216

Interlux Epoxy Primekote

Epoxy Primekote is a multi-purpose two-part epoxy primer for use above and below the waterline. Epoxy Primekote is an excellent under coater for Perfection. It is used as a sanding surface to smooth rough lay-up and to resurface cracked and crazed gelcoat. Epoxy Primekote should also be used over clear epoxies to eliminate the effects of amine blush. Apply with a brush, roller, or sprayer to fiberglass, wood, aluminum and steel.
You May also need:
Thinner with brush/roller: 2316N
Thinner with sprayer: 216

Interlux TBT Sealer

TBT Sealer is designed for use when converting from a TBT containing antifouling to Micron 66 or Trilux 33. TBT antifouling paints are susceptible to solvent attack from primers and from non-TBT containing antifouling paints and TBT Sealer will not cause the TBT to soften or crack. TBT Sealer is also used to prevent leaching of TBT from an underlying antifouling coating. TBT Sealer can be applied by brush, roller or with airless or conventional spray equipment.

Awlgrip 30-Y-94 Primer Base

Awlgrip 30-Y-94 Primer Base is a two-part epoxy primer designed to eliminate the need to sand before applying! For use on aluminum and steel above the waterline, Awlgrip 30-Y-94 Primer Base can save you time without losing the quality you want!

Awlgrip 30-Y-94 Converter

Awlgrip 30-Y-94 Converter is a two component anti-corrosive, strontium chromate epoxy primer for aluminum and steel with excellent chemical and solvent resistance. Do not use below the waterline. This spray on system is not complete without the converter (S3001) and reducer (T0006).

Awlgrip 345 HS Primer Converter

Awlgrip 345 HS Primer Converter is a two component high solids, VOC compliant epoxy finish primer. May be applied by spray, brush or roller.

Awlgrip 345 HS Primer Base

Awlgrip 345 HS Primer Base is a two component high solids, VOC compliant epoxy finish primer. May be applied by spray, brush or roller.

Awlgrip 545 Epoxy Primer Base

Awlgrip 545 Epoxy Primer Base is a two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. 545 is also used to seal filler primers and fairing work before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.

Awlgrip 545 Epoxy Primer Converter

Awlgrip 545 Epoxy Primer Converter is a two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood, and fiberglass substrates. 545 is also used to seal filler primers and fairing work before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.

Awlgrip AwlQuik Epoxy Primer Base

Awlgrip Awlquik Epoxy Primer Base is a quick drying, medium build, easily sanded, two component epoxy surfacer. Easy to apply by brush, roller or spray. Not to be used below the waterline.

Awlgrip AwlQuik Epoxy Primer Converter

Awlgrip Awlquik Epoxy Primer Converter is a quick drying, medium build, easily sanded, two component epoxy preimer. Easy to apply by brush, roller, or spray. Not to be used below the waterline.

Awlgrip High Build Epoxy Primer Base

Awlgrip High Build Epoxy Primer Base is a two component epoxy surfacer for use where high build and filling is required. Not to be used below the waterline.

Awlgrip High Build Converter

Awlgrip High Build Converter is a two component epoxy surfacer for use where high build and filling is required. Not to be used below the waterline.

Awlgrip Hull-Gard Epoxy Primer Base

Awlgrip Hull-Gard Epoxy Primer Base is a two component epoxy primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. It offers a long overcoating interval without sanding to reduce work time for underwater systems.

Awlgrip Hull-Gard Epoxy Primer Converter

Awlgrip Hull-Gard Epoxy Primer Converter is a two component epoxy primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. It offers a long overcoating interval without sanding to reduce work time for underwater system.

Awlgrip Quik-Grip Converter

Awlgrip Quik-Grip Converter is fast drying, and excellent for small parts and repairs. Spray application only.

Awlgrip Quik-Grip White Base

Awlgrip Quik-Grip White Base is a fast drying urethane primer. It is excellent for small repairs or parts. Spray application only.

Awlgrip Ultra-Build Converter

Awlgrip Ultra-Build Converter is a two component epoxy primer with excellent sag resistance and excellent film build/filling capability. For use where high build and filling is required above the waterline.